TL L5-2451cc 2.5L SOHC MFI (1997)
6. Remove the camshaft holders. Measure the widest portion of plastigage on each journal.
7. If the camshaft-to-holder oil clearance is out of tolerance:
-
And the camshaft has already been replaced, you must replace the cylinder head.
-
If the camshaft has not been replaced, first check the total runout with the camshaft supported on V-blocks.
-
If the total runout of the camshaft is within tolerance, replace the cylinder head.
-
If the total runout is out of tolerance, replace the camshaft and recheck. If the oil clearance is still out of tolerance, replace the cylinder head.
8. Check the cam lobe height wear.
Cam Lobe Height Standard (New):
INTAKE: 39.203 mm (1.5434 in.)
