TL L5-2451cc 2.5L SOHC MFI (1997)
Front Crankshaft Seal: Service and Repair
INSTALLATION
NOTE:
-
The crankshaft oil seal housing surface should be dry.
-
Engine removal not required.
-
Apply a light coat of grease to the crankshaft and to the lips of the seals.
1. Using the special tool, drive in the front crankshaft oil seal until the driver bottoms against the oil pump. When the seal is in place, clean any
excess grease off the crankshaft, and check that the front crankshaft oil seal lip is not distorted.
