TL L5-2451cc 2.5L SOHC MFI (1997)
6. Remove the harness clamp from the rear side cover, then remove the A/T gear position switch from the control shaft.
7. Set the A/T gear position switch to the (N) position as shown.
NOTE: The A/T gear position switch clicks in the (N) position.
8. Set the control shaft to the (N) position, then install the A/T gear position switch on the control shaft and install the clamp on the rear cover,
9. Connect the A/T gear position switch connector, then install the harness stay.
10. Turn the ignition switch ON (II). Move the shift lever through all gears, and check the A/T gear position switch synchronization with the A/T gear
position indicator.