TL L5-2451cc 2.5L SOHC MFI (1997)
11. If the A/T gear position switch does not synchronize with the A/T gear position indicator, loosen the bolts securing the A/T gear position switch
and adjust the A/T gear position switch installation.
12. Install the A/T gear position switch cover. Tighten the bolt on the ATF pan side loosely so that there is no clearance between the A/T gear position
switch cover and the ATF pan. Then tighten the bolt on the rear cover side to the specified torque, and tighten the bolt on the ATF pan side to the
specified torque.
13. Start the engine. Move the shift lever through all gears, and verify the following:
-
The shift lever cannot be moved to the (R) position from the (N) position without pushing the shift lever.
-
The engine will not start in any gear, only in the (N) or (P) position.
-
The back-up lights come on when the shift lever is in the (R) position.
