TL L5-2451cc 2.5L SOHC MFI (1997)
NOTE: It is not necessary to loosen the cylinder lines A and B between the valve body unit and the cylinder.
10. Remove the splash guard.
NOTE: Some splash guard mounting bolts are also used as gearbox mounting bolts. The gearbox will tilt to the side when these bolts are
removed.
11. Unlock the pipe clamps, and remove the sensor line from the rear beam.
12. Remove the right mounting bracket and steering gearbox.
NOTE: Before removing the gearbox, place a jack stand under the gearbox.
CAUTION: Be careful not to bend or damage the cylinder lines A and B when removing the steering gearbox.
