TL L5-2451cc 2.5L SOHC MFI (1997)
6. Install the sensor line on the rear beam.
7. Install the sensor line and air tube on the pipe clamps.
8. Tighten the two gearbox mounting bolts on the right side.
9. Install the splash guard with the two gearbox mounting bolts on the left side.
10. Tighten the splash guard attaching bolts.
NOTE: Install the bolts loosely first, then tighten them securely.
11. Reconnect the two lines and two hoses to the valve body unit.
NOTE:
-
Check the hose bands and clip for deformation and deterioration, and replace then if necessary.
-
After installing the steering gearbox, make sure that there is no interference between the cylinder lines and rear beam.
