TL L5-2451cc 2.5L SOHC MFI (1997)
1. Install the main separator plate and the two dowel pins on the main valve body.
2. Install the servo body on the main valve body (two bolts).
3. Install the main valve body cover on the main valve body (six bolts) as shown.
4. Install the one bolt on the main valve body as shown.
5. Install the ATF feed pipes and ATF pass body.
SHIFT FORK INSTALLATION
1. Turn the shift fork shaft so the large chamfered hole is facing the fork bolt hole.
2. Install the shift fork and the lock bolt with a new lock washer, and torque the bolt.
3. Bend the lock tab against the bolt head.
PARKING BRAKE ROLLER ROD INSPECTION
1. Shift to P position.
