TL V6-3.2L (2004)
Remote Control: Service and Repair
Radio Remote Switch Test/Replacement
1. Remove the driver's airbag assembly.
2. Remove the 7P connector (A) from the radio remote switch (B).
3. Remove the two mounting screws and the switch.
4. Measure resistance between the No. 1 and No. 2 terminals in each switch position according to the table.
5. If the resistance is not as specified, replace the radio remote switch.
6. Check for continuity between the No. 3 and No. 4 terminals, and No. 5, No. 6* and No. 7 terminals. There should be continuity.
* : With HandsFreeLink system or navigation system.
7. If the continuity check is not as specified, replace the switch.
