TL V6-3.2L (2004)
Windshield Moulding / Trim: Technical Service Bulletins
Body - Satin Finish Chrome And Water Spots
Satin Finish Chrome and Those Stubborn Water Spots
NOTE:
This article applies to '03-06 MDXs, '07 RDXs, and '04-06 TLs.
Water spots seem to stick more to satin finish chrome moldings like grilles and rear license plate frames than to regular painted surfaces. Fortunately,
there are a number of cleaning products available that can easily get rid of stubborn water spots.
Acura Spray Cleaner and Polish (P/N 08C25-P011M) is an excellent choice. But if it's not available in your area, then try using one of these aftermarket
products instead. You'll find them in most retail auto supply stores:
^
Meguiar's Quik Wax: Visit their website at www.meguiars.com.
^
Protect All: Visit their website at www.protectall.com.
^
RainX Fast Wax: Visit their website at www.rainx.com.
IMPORTANT:
If you decide to go with a product other than the ones listed here, make sure it has no abrasives or acids. If it does, you could affect the gloss
characteristics of the satin finish.