TL V6-3.2L (2004)
Rear Fender Liner: Service and Repair
Rear Inner Fender Replacement
NOTE: Take care not to scratch the body.
1. Remove the fuel pipe protector.
2. Remove the rear inner fender (A).
1. Remove the screws (B) from the front and rear of the rear inner fender.
2. Remove the bolts (C) and clips (D, E, F).
3. Pull out the rear inner fender.
NOTE: Left side shown, right side is similar.
3. Install the inner fender in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Push the clips into place securely.
