TL V6-3.2L (2004)
9. Release the hooks (D) with a flat-tip screwdriver by pushing the screwdriver toward the door, then lift upwards. Pull the fastener (E) out, then
remove the carpet.
10. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses and antenna lead are routed correctly.
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Reconnect the negative cable to the battery.
-
Set the clock.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the audio presets.