TL V6-3.2L (2004)
8. Install the slider and cable in the reverse order of removal, and note these items:
-
Damaged parts should be replaced.
-
Apply multipurpose grease to the glass bracket (A) and guide rail portion of the frame (B) indicated by the arrows.
-
Apply butyl sealant (C) to both the frame (D) and the slide stop (E), then reinstall with screw (F).
-
Apply liquid thread lock to the set plate (G) mounting screws (H) before reinstallation.
-
Before reinstalling the motor, slide both glass brackets rearward fully until the slider portions (I) of the inner cable contact with the screws (J)
on the guide rail to align both glass brackets.
-
Before reinstalling the motor, install the frame and glass, then check the opening drag.
-
After reinstalling the motor, do the moonroof calibration.
