TL V6-3.2L (2004)
4. For '05-06 models: From under the seat cushion, disconnect the seat-back heater connector (A) on the 10-way power seat, and power seat
subharness connector (B) on each side seat.
Detach the side airbag connector clip (C), power seat subharness connector clip (D) and OPDS unit connector clip (E) on the 4-way power seat.
Release the seat cushion cover (F) and hooks (G) from the seat cushion frame spring (H), then pull the cover back, and remove the wire ties (I).
5. Remove these items from the front seat, then remove the seat-back, 4-way power seat, 10-way power seat:
-
Recline cover
-
Center cover
6. Detach the clips and hooks (A) by pulling the bottom of the back panel (B) back, then pull the panel upward to release the hooks (C) from the seat
back frame, and remove the panel.
