TL V6-3.2L (2004)
Seat Cover: Service and Repair
Front Seat Cover Replacement
Front Seat Cover Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
Seat-back Cover
1. Remove the front seat.
2. Remove the headrest.
3. For '04 model: From under the seat cushion, disconnect the seat-back heater connector (A) on the 10-way power seat.
Detach the side airbag connector clip (B), power seat subharness connector clip (C) and OPDS unit connector clip (D) on the 4-way power seat.
Release the seat cushion cover (E) and hooks (F) from the seat cushion frame spring (G), then pull the cover back, and remove the clamps (H).
