TL V6-3.2L (2004)
2. Remove the brake hose mounting bolts (A).
3. Remove the flange bolt (B) while holding the pin (C) with a wrench being careful not to damage the pin boot, and pivot the caliper (D) up out of
the way. Check the hose and pin boots for damage and deterioration.
4. Remove the pad shims (A) and the brake pads (B).
5. Remove the pad retainers (A).
6. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
7. Check the brake disc for damage and cracks.
8. Clean and install the pad retainers.