TL V6-3.2L (2004)
2. Remove the pad pins (A) using the special tool from the outside to the inside of vehicle, and remove the pad spring (B).
3. Remove the brake pads (A).
4. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
5. Check the brake disc for damage and cracks.
6. Mount the special tool (A) on the caliper.
7. Press in the outside and inside pistons with the brake caliper wrench so the caliper will fit over the pads.
8. Remove the special tool.
9. Apply Molykote M77 grease (P/N 08798-9010) to the back of the brake pads (A). Wipe excess grease off the pads. Contaminated brake discs or
