TL V6-3.2L (2004)
brake pads reduce stopping ability. Keep grease off the brake disc and pads.
10. Install the brake pads correctly. Install the brake pad with the wear indicator (B) on the outside. If you are reusing the brake pads, always reinstall
the brake pads in their original positions to prevent a momentary loss of braking efficiency.
11. Install the pad spring (A).
12. Hold the pad spring, and install the, pad pins (B) into the caliper from the inside to the outside of vehicle using the special tool.
13. Press the brake pedal several times to make sure the brakes work, then test-drive.
NOTE: Engagement of the brakes may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
14. After installation, check for leaks at the brake hose and line joints or connections, and retighten if necessary.
15. Reinstall the front wheels. Take care not to scratch the calipers.
