TL V6-3.2L (2004)
5. Remove the lock pin (A) and the joint pin (B), then disconnect the yoke (C) from the brake pedal.
6. Remove the brake booster mounting nuts (D).
7. Remove the brake booster (A) from the engine compartment.
NOTICE:
^
Be careful not to damage the booster surfaces and threads of the booster stud bolts.
^
Be careful not to bend or damage the brake lines.
8. Install the brake booster in the reverse order of removal, and note these items:
^
Adjust the pushrod length before installing the brake booster.
^
Use a new lock pin whenever installing.
^
After installing the brake booster and master cylinder, fill the reservoir with new brake fluid from an unopened container bleed the brake
system, and adjust the brake pedal height and free play.
