TL V6-3.2L (2004)
1. Remove the intake manifold cover.
2. Remove the air intake duct.
3. Remove the engine mount control solenoid valve (A), positive crankcase ventilation (PCV) hose (B), brake booster vacuum hose (C), and vacuum
hose (D).
4. Remove the evaporative emission (EVAP) canister purge hose (A) and water bypass hoses (B), then plug the water bypass hoses.
5. Remove the engine wire harness connectors and wire harness clamps from the intake manifold.
^
Intake air temperature (IAT) sensor connector
^
Idle air control (IAC) valve connector
^
Throttle actuator connector
^
Manifold absolute pressure (MAP) sensor connector
^
Evaporative emission (EVAP) canister purge valve connector
^
Intake manifold runner control (IMRC) solenoid valve connector