TL V6-3.2L (2004)
Intake Manifold: Specifications
Intake Manifold
Tighten the bolts and nuts sequentially in two or three steps. Always use a new intake manifold gasket.
Specified torque: 8 x 1.25 mm .............................................................................................................................................. 22 Nm (2.2 kgf.m, 16 lbf ft)
Intake Manifold Upper Cover
Tighten the bolts and nuts sequentially in two or three steps. Always use a new gasket.
Specified torque: 6 x 1.0 mm ............................................................................................................................................... 12 Nm (1.2 kgf.m, 8.7 lbf ft)