TL V6-3.2L (2004)
2. Install the upper cover. Tighten the bolts and nuts sequentially in two or three steps. Always use a new gasket.
3. Install the EVAP canister purge hose (A) and water bypass hoses (B).
4. Install the engine mount control solenoid valve (A), positive crankcase ventilation (PCV) hose (B), brake booster vacuum hose (C), and vacuum
hose (D).
5. Install the intake air duct.
6. Clean up any spilled engine coolant.
7. After installation, check that all tubes, hoses and connectors are installed correctly.
