TL V6-3.2L (2004)
8. Disconnect the P/S feed hose from the steering gearbox by loosening its flare nut.
NOTE:
To prevent fluid from dripping, place several shop towels under the feed hose connection, and wrap a towel around the exposed joint end.
9. Remove the end of the P/S feed hose from the P/S pump.
NOTE:
To prevent fluid from dripping, wrap a towel around the exposed end of the hose.
10. Replace the P/S pump inlet joint 0-ring:
^
Remove the inlet joint from the pump (one bolt).
^
Remove the 0-ring from the inlet joint.
^
Lubricate a new 0-ring with clean P/S fluid, then install it on the end of the joint.