Timing Belt: Testing and Inspection (page 12 of 15)
- Make
- Acura (Honda)
- Model
- TL
- Engine
- V6-3.2L
- Year
- 2004
- Section
- Timing Belt
MaintenanceTesting and Inspection · page 12 of 15
3. Set the camshaft pulleys to TDC by aligning the TDC marks (A) on the camshaft pulleys with the pointers (B) on the back covers.
4. Apply liquid thread lock (P/N 08713-0001) to the idler pulley bolt, then loosely install the idler pulley.
5. If the auto-tensioner has extended and the timing belt cannot be installed, perform the new belt installation procedure.
6. Install the timing belt in a counterclockwise sequence starting with the drive pulley. Take care not to damage the timing belt when installing it.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2004 Acura TL 3.2L
- PARTTiming belt kitSearch: Acura TL 2004 3.2L timing belt kit
- TOOLEngine timing tool setSearch: Acura engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.