TL V6-3.2L (2004)
6. Place the new front passenger's airbag into the bracket. Tighten the front passenger's airbag mounting nuts (A).
NOTE:
-
Be sure to install the front passenger's airbag so they do not interfere with other parts.
-
When you install the front passenger's airbag, be careful not to damage the bag.
-
Be sure to keep the new airbag clean and do not unfold or tamper with the cloth cover on the airbag.
7. Install the dashboard assembly in the vehicle.
8. Connect the front passenger's airbag 4P connector (A) to the dashboard wire harness, then reinstall the all removed parts in the reverse order that
they were removed.
9. Reconnect the battery negative cable.
10. Connect the HDS and clear the DTCs.
11. After installing the airbag, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6
seconds and then go off.
