TL V6-3.2L (2004)
NOTE:
When lining up the feed hoses, do not bend or scratch the painted metal line section of the new hose. Even a scratch on the paint could cause
future P/S line corrosion.
19. Raise the vehicle on a lift, and make sure it's securely supported.
20. Remove the engine under cover (two bolts and four clips).
21. Remove exhaust pipe A:
^
Remove the rubber exhaust hanger from the subframe.
^
Remove exhaust pipe A along with the three way catalytic converter (TWC) (nine self-locking nuts). The nuts will not be reused.
^
Support exhaust pipe B with a stand.
