TL V6-3.2L (2004)
5. Rotate the steering gearbox so the pinion shaft (A) points upward.
6. Continue moving the gearbox toward the passenger's side until the steering gearbox is in position. Make sure the power steering return line and
feed line are routed above the gearbox.
7. Remove the vinyl tape from the pinion shaft, and install the pinion shaft grommet (A).Align the slot in the pinion shaft grommet with the lug
portion (B) on the valve housing.
8. Position the cutout (A) on the mounting cushion (B) as shown, and install it on the cylinder of the gearbox securely.
9. Install the new gearbox mounting bracket (C) over the mounting cushion, and loosely install the two flange bolts.
