TL V6-3.2L (2004)
10. Install the new gearbox mounting bolts (A) and washers (B) on the left side of the gearbox, then tighten them to the specified torque.
11. Tighten the flange bolts on the right side of the gearbox to the specified torque alternately in two or more steps.
12. Loosely connect the return line and feed line by hand.
13. Install the feed line holder (A) and return hose (B) on the gearbox mounting bracket (C)
14. Install the feed line holder (D) on the front suspension subframe. Make sure that there is no interference between the feed and return lines and any
other parts.
15. Tighten the return line flare nut (A) to the specified torque.
16. Tighten the feed line flare nut (B) to the specified torque.
