TL V6-3.2L (2004)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Replacement
NOTE: Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
1. Remove the left rear engine compartment cover (A) and the left side engine compartment cover (B).
2. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
3. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's XM radio channel presets. Make
sure the ignition switch is OFF. Disconnect the negative (-) cable first, then the positive (+) cable from the battery. Remove the battery.
4. Remove the air cleaner housing.
5. Remove the battery base.
6. Remove the under-hood fuse/relay box.
7. Remove the driver's dashboard lower cover.