TL V6-3.5L (2007)
Cellular Phone: Symptom Related Diagnostic Procedures
HFL message cannot be heard or are weak
HFL message cannot be heard or are weak
NOTE: Vehicles equipped with AcuraLink, go to AcuraLink messages cannot be heard or are weak.
1. Turn the ignition switch ON (II).
2. Check that the audio system is operating normally and the speaker sound levels from different audio sources (AM/FM, XM, CD/DVDs,
Navigation, etc.).
Does the audio system work normally and is the audio output from the speaker normal when playing various audio sources?
YES - Go to step 3.
NO - Refer to the audio system symptom troubleshooting. See: Radio, Stereo, and Compact Disc/Testing and Inspection/Symptom Related
Diagnostic Procedures/Audio System/Index, Symptom Troubleshooting
3. Check the audio system when HFL messages are played.
Dose the audio system mute when HFL messages are being played?
YES - Go to step 4.
NO - Go to step 9.
4. Turn the ignition switch OFF.
5. Disconnect audio unit connector connector C (40P) and HandsFreeLink control unit 28P connector.
6. Check for continuity between HandsFreeLink control unit 28P connector terminal No. 11 No. 25 and audio unit connector C (40P) terminal No.
13 and No. 12 individually.
Is there continuity?
YES - Go to step 7.
NO - Open in the wire(s) between HandsFreeLink control unit and audio unit. Replace the affected shielded harness.
