TL V6-3.5L (2007)
Front Bumper: Service and Repair
Front Bumper Removal/Installation
Front Bumper Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Put on gloves to protect your hands.
-
Have an assistant help you when removing and installing the front bumper.
-
Take care not to scratch the front bumper and body.
1. Remove these items:
-
Front bulkhead cover
-
Front strake
2. Remove the bolts (A), screws (B), and clips (C) securing the front bumper (D).
3. Pull on the front bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).