TL V6-3.5L (2007)
4. With the help of an assistant, pull the wheel arch portion away from the side spacer (A) while pulling the front bumper to release the bumper from
the hooks (B) on the corner upper beam (C).
5. Disconnect the fog light connector (A), then remove the front bumper (B).
6. Release the hooks, then remove the front bumper absorber (A) from the front bumper beam (B).
7. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the front bumper engages the hooks (of both corner upper beams and side spacers) on each side securely.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Make sure the fog light connectors are plugged in properly.
-
Push the clips and hooks into place securely.