TL V6-3.5L (2007)
10. Pull back the edge of the seat-back cover all the way around, and release the clips (A) and Velcro fastener (B), then remove the seat-back cover.
11. Install the cover in the reverse order of removal, and note these items:
-
Reinitialize the ODS unit.
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, hooks,
and hook strips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).
-
Reinstall the front hook (C) and rear hook (D) of the reinforcing cloth (E) securely.
-
Use only original Acura replacement seat-back covers.
-
Make sure the power seat subharness, side airbag harness, seat-back heater harness, and ODS unit harness (passenger's seat) are routed
properly.
