TL V6-3.5L (2007)
6. Pull out the head restraint guides (A) while pinching the ends of the guides, and remove them.
7. Remove the seat-back cover and pad from the seat-back frame.
8. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), Velcro fasteners (C), then remove the seat-back cover.
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips,
and clips.
-
Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).