TL V6-3.5L (2007)
Is there battery voltage?
YES - Go to step 25.
NO - Repair open in the wire between DLC terminal No. 4 and G501.
25. Connect the HDS to the DLC.
26. Jump the SCS line with the HDS.
27. Disconnect ECM/PCM connector E (31P).
28. Disconnect the HDS from the DLC.
29. Connect DLC terminal No. 6 to body ground with a jumper wire.
30. Check for continuity between ECM/PCM connector terminal E15 and body.
Is there continuity?
YES - Go to step 31.
NO - Repair open in the wire between the ECM/PCM (E15) and DLC terminal No. 6.
31. Disconnect the jumper wire.
32. Connect DLC terminal No. 14 to body ground with a jumper wire.