TL V6-3.5L (2007)
56. Measure voltage between ECM/PCM connector terminal D2 and body ground.
Is there about 5 V?
YES - Go to step 62.
NO - Go to step 59.
57. Turn the ignition switch OFF.
58. Disconnect the APP sensor 6P connector, and measure voltage between ECM/PCM connector terminal D2 and body ground with the ignition
switch ON (II).
Is there about 5 V?
YES - Replace the APP sensor.
NO - Go to step 59.
59. Turn the ignition switch OFF.
60. Jump the SCS line with the HDS.
61. Disconnect ECM/PCM connector D (17P).
62. Check for continuity between ECM/PCM connector terminal D2 and body ground.
Is there continuity?
YES - Repair short in the wire between the ECM/PCM (D2) and APP sensor A.
