TL V6-3.5L (2007)
32. Install the pulley (A), then loosely install the pulley nut (B). Hold the steering pump in a vise with soft jaws. Be careful not to damage the pump
housing with the jaws of the vise.
33. Hold the pulley with the pulley holder, and tighten the pulley nut to the specified torque.
34. Check that the pump turns smoothly by turning the pulley by hand. If it is hard to turn, loosen the four flange bolts on the cover, then retighten
them in the same manner as in the step 28. Turn the pump again by hand.