TL V6-3.5L (2007)
Shift Cable: Service and Repair
Shift Cable Replacement
1. Raise the vehicle on a lift, or apply the parking brake, block rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
2. Remove the center console cover.
3. Shift the transmission into the R position.
4. Remove the nut securing the shift cable end.
5. Press the holder lock release (A), and pull out the socket holder (B) to remove the shift cable (C) from the shift lever bracket (D).
6. Make sure you have the anti-theft codes for the audio system and the navigation system (if equipped), and write down the audio presets.
7. Remove the battery trim and left upper fender trim.
8. Disconnect the battery negative terminal, then disconnect the battery positive terminal.
9. Remove the battery hold-down bracket, and remove the battery and battery tray.
10. Remove the intake air duct and air cleaner assembly.
11. Remove the battery base.
12. Remove the nuts securing the shift cable bracket (A).
