TL V6-3.5L (2007)
10. Pull back the boot (B), and apply brake assembly lube to the boot and slave cylinder rod (C). Reinstall the boot.
11. Apply super high temp urea grease (P/N 08798-9002) to the pushrod of the slave cylinder and the release fork. Tighten the slave cylinder
mounting bolts to 22 N-m (2.2 kgf-m, 16 lbf-ft).
12. Do the clutch hydraulic system bleeding.
13. Check the clutch operation and check for leaks.
14. Install the battery base.
15. Install the air cleaner assembly.
16. Install the battery. Clean the battery posts and cable terminals. Connect the positive cable to the battery first, then connect the negative cable, and
apply multipurpose grease to prevent corrosion.
17. Install the left rear engine compartment cover and the left side engine compartment cover.
18. Enter the anti-theft codes for the audio unit and the navigation system, then enter the audio presets.
19. Test-drive the vehicle.
