TL V6-3.5L (2007)
3. Make marks (A) on each roller (B) and inboard joint (C) to identify the locations of the rollers and grooves in the inboard joint. Then remove the
inboard joint on a shop towel (D). Be careful not to drop the rollers when separating them from the inboard joint.
NOTE: Do not engrave or scribe marks on the rolling surface.
4. Make marks (A) on the rollers (B) and spider (C) to identify the locations of the rollers on the spider, then remove the rollers.
NOTE: Do not engrave or scribe marks on the rolling surface.
