TL V6-3.5L (2007)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Reassembly
Intermediate Shaft Reassembly
M/T Model
Intermediate Shaft (M/T Model)
Special Tools Required
^
Oil seal driver 07GAD-PH70201
^
Oil seal driver attachment 07JAD-PH80101
^
Support base attachment 07LAF-SM40300
^
Attachment, 52 x 55 mm 07746-0010400
^
Attachment, 35 mm I.D. 07746-0030400
^
Driver 07749-0010000
^
Fork seal driver, 39.2 x 49.5 x 15 mm 07947-4630100
^
Support base 07965-SD90100
NOTE: Refer to the Exploded View, as needed, during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air. Do not wash the rubber parts with solvent.
2. Press the intermediate shaft bearing (A) into the bearing support (B) using the attachment, 52 x 55 mm (C), driver (D), and a press.
