TL V6-3206cc 3.2L SOHC MFI (1998)
5. Turn the head over and drive the guide out toward the camshaft side of the head.
CAUTION: Drill guides only in extreme cases: you could damage the cylinder head if the guide breaks.
6. Remove the new guides from the freezer, one at a time, as you need them.
7. Apply a thin coat of clean engine oil to the outside of the new valve guide. Install the guide from the camshaft side of the head; use the special tool
to drive the guide in to the specified installed height. If you have all 12 guides to do, you may have to reheat the head.