TL V6-3206cc 3.2L SOHC MFI (1998)
Valve Guide Installed Height:
Intake: 15.75 - 16.25 mm (0.620 - 0.640 inch)
Exhaust: 15.75 - 16.25 mm (0.620 - 0.640 inch)
REAMING
NOTE: For new valve guides only.
1. Coat both the reamer and valve guide with cutting oil.
2. Rotate the reamer clockwise the full length of the valve guide bore.
3. Continue to rotate the reamer clockwise while removing it from the bore.
4. Thoroughly wash the guide in detergent and water to remove any cutting residue.
5. Check the clearance with a valve.
-
Verify that a valve slides in the valve guide without exerting pressure.
