TL V6-3206cc 3.2L SOHC MFI (1998)
Oil Pan: Service and Repair
Installation
Install the oil pan in the reverse order of removal:
-
Always use new O-rings.
-
Oil pan and cylinder block mating surface must be clean.
1. Apply liquid gasket to the cylinder block, then install the oil pan.
NOTE:
-
Use liquid gasket, Part No. 08718 - 0001 or 08718 - 0003.
-
Check that the mating surfaces are clean and dry before applying liquid gasket.
-
Apply liquid gasket evenly, being careful to cover all the mating surface.
-
Do not apply liquid gasket to O-ring grooves.
-
To prevent oil leakage, apply liquid gasket to the inner threads of the bolt holes.
-
Do not install the parts if five minutes or more have elapsed since applying liquid gasket.
-
Instead, reapply liquid gasket aver removing old residue.
-
After assembly, wait at least 30 minutes before filling the engine with oil.
NOTE: Use new O-rings. Apply oil to the O-rings before installation.