TL V6-3206cc 3.2L SOHC MFI (1998)
Oil Pan Bolt Torque Sequence
2. Tighten the oil pan bolts as shown.
Torque:
8 x 1.25 mm: 22 Nm (16 ft. lbs.)
3. Install the differential assembly.
-
Select the appropriate 26 mm shim whenever the oil pan or the cylinder block is replaced.
4. Apply grease to the spline of the extension shaft, then install the new set ring with the open side facing up.
5. Install the extension shaft with the special tool.
NOTE: Make sure the extension shaft locks in place.
