TL V6-3206cc 3.2L SOHC MFI (1998)
17. Insert a 24" long 3/8" drive extension into the cylinder and the special tool from the gearbox side.
CAUTION: Be careful not to damage the inside surface of the housing with the tools.
18. Set the steering gearbox in a press, then press out the cylinder end seal and backup ring from the gearbox.
CAUTION:
-
Keep the tool straight to avoid damaging the cylinder wall. Check the tool angle, and correct it if necessary, when removing the cylinder end
seal.
-
Use a press to remove the cylinder end seal. Do not try to remove the seal by striking the tool. It will break the backup ring, and the cylinder
end seal will remain in the gearbox.