TL V6-3206cc 3.2L SOHC MFI (1998)
19. Check the rubber stop for damage or deterioration if OK, go on step 20; if not, replace the rubber stop, step as shown below:
Remove the rubber stop by prying it out of the gearbox housing with a flat tip screwdriver.
CAUTION: Protect the pry point on the gearbox housing with shop towel.
20. Carefully pry the piston seal ring and O-ring off the rack piston.
CAUTION: Be careful not to damage the inside of seal ring groove and piston edges when removing the seal ring.