TL V6-3206cc 3.2L SOHC MFI (1998)
Reinstall the steering wheel:
6. Reconnect the two lines (feed line and sensor line) to the upper side of the valve body unit.
7. Reconnect the two lines (sensor inlet line and return line) to the lower side of the valve body unit.
8. Install the line mounting cushions by aligning the pink marks on the return line (large diameter line).
NOTE: After installing the pipe mounting cushions, make sure that there is no interference between the lines and rear beam.
9. Install the two line clamps on the line mounting cushions.
