TL AWD V6-3.7L (2010)
Keyless Entry Receiver: Service and Repair
Keyless Access RF Unit 1 Replacement (With Keyless Access System)
Keyless Access RF Unit 1 Replacement
1. Remove the center console panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Panel Removal/Installation.
2. Disconnect the 3P connector (A) from RF unit 1 (B) and remove the harness clip (C).
3. Remove the bolts and RF unit 1.
4. Install the unit in the reverse order of removal.
