TL AWD V6-3.7L (2010)
Navigation Display: Service and Repair
Navigation Display Unit Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the dashboard and related parts.
-
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
-
When prying components, use the handy remover set or equivalent.
1. Remove the dashboard center vent See: Heating and Air Conditioning/Air Register/Service and Repair/Dashboard Center Vent
Removal/Installation.
2. Remove the screws and bolt (A) from the navigation display unit (B).
3. Pull out the navigation display unit. Then disconnect the connector (A) from the navigation display unit.
4. Install the navigation display unit in the reverse order of removal.
