TL AWD V6-3.7L (2010)
14. Install the outer handle in the reverse order of removal, and note these items:
-
Push the clips and the hooks into place securely.
-
Reinstall the lock cylinder (driver's door) or the outer handle holder (passenger's door) before installing the outer handle cover.
-
Make sure that the power door lock actuator connectors are plugged in properly, and that the lock cylinder cable and the outer handle rod are
connected securely.
-
Make sure the door key cylinder/door locks operate properly.
-
Make sure the door handle works properly.
-
When reinstalling the door panel, make sure the plastic cover on the door is installed properly .